Automatic coil winding machine ZPX250 is a special wire winder machine, which can be used to wind both copper wire and aluminium wire to make transformer coils and other similar products. The automatic coil winding machine can wind the coil with maximum height 250mm. The automatic coil winding machine is provided with main winding motor, wire guide, touch screen, a foot pedal and so on. One servo motor with power 0.75kw is adopted to drive the wire guide, which guarantees the precision of the start and stop actions. The touch screen of the automatic coil winding machine provides a user friendly interface and the parameters can be input through the touch screen. With PLC control system and HMI, the automatic coil winding machine can be operated easily. The tensioning system ensures that the wire is properly tensioned during the winding process. The automatic coil winding machine features slow starting, smooth running and so on.

Main features of automatic coil winding machine ZPX250

Slow starting
Smooth running
High automation
Full function
Easy operating

Technical parameters of automatic coil winding machine ZPX250

Typical standard specifications of automatic coil winding machine ZPX250 are shown below, however, the coil winding machine can also be manufactured as requested. .

Shaft Height from Floor:	900mm
Tailstock:	Live center
Winding Motor Power:	2.2kw
Rotating Speed:	0 ~ 120 rpm
Speed Regulation:	stepless speed regulation
Control System:	PLC
Maximum Flat Wire:	2.0x8.0mm
Round Wire Diameter:	Ø0.3-4.0mm
Max Finished Coil Height:	250mm
Max Finished Coil OD:	Ø400mm
Automatic Wire Laying Function:	Min. Spread Pitch: 0.01mm
Basic Function:	5-digit counting, turn number preset by segments, total turn number preset, reversible counting, and power off memory, etc.
Counting Turn Range:	0 ~ 9999.9